中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
JG/T 151-2015 建築產品分類和編碼(中英文版) Classifying and coding of construction products |
|||
GB 50617-2010 建築電氣照明裝置施工與驗收規範(中英文版) Code for construction and acceptance of electrical lighting installation in building |
|||
GB/T 36004-2018 食品接觸表面清洗消毒效果試驗方法 三磷酸腺苷生物發光法(中英文版) Food contact surfaces cleaning and disinfection efficacy test method—ATP bioluminescence method |
|||
GB/T 30670-2014 雲錦妝花緞(中英文版) Satin of brocade―Zhuang hua |
|||
GB/T 1360-1998 印製電路網格體系(中英文版) Grid systems for printed circuits |
|||
SB 10336-2000 配製醬油(中英文版) Blended soy sauce |
|||
SN/T 3041-2011 出口食品接觸材料 高分子材料 硼酸及四硼酸鈉的測定 icp-ms法(中英文版) Food contact materials for export. Polymers. Determination of boric acid and sodium tetraborate. ICP-MS method |
|||
SY/T 7061-2016 水下高完整性壓力保護系統(hipps)推薦做法(中英文版) (Underwater High Integrity Pressure Protection System (HIPPS) Recommended Practice) |
|||
YD/T 1949.3-2010 接入網技術要求 吉比特的無源光網路(gpon) 第3部分:傳輸彙聚(tc)層要求(中英文版) Technical requirements for access network. Gigabit-capability passive optical network (GPON). Part 3: Transmission convergence (TC) layer requirements |
|||
JC/T 1058-2007 氧化鋯陶瓷刀口環(中英文版) Zirconia ceramic edged ring |
|||
QB/T 2527-2001 縫紉機零件熱處理通用技術條件(中英文版) (General technical conditions for heat treatment of sewing machine parts) |
|||
GB/T 23268.1-2009 運動保護裝備要求 第1部分:登山動力繩(中英文版) Specifications for protective equipments for sports - Part 1: Dynamic mountaineering ropes |
|||
SY/T 5380-1991 鑽井液濾失量儀(中英文版) (Fluid filtration meter) |
|||
GB/T 40764-2021 地理資訊 過濾編碼(中英文版) Geographic information—Filter encoding |
|||
GB/T 20159.2-2008 環境條件分類 環境條件分類與環境試驗之間的關係及轉換指南 運輸(中英文版) Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes to the environment tests - Transportation |
|||
QB/T 1027-1991 合成檀香803(中英文版) (Sandenol 803) |
|||
GB/T 6150.5-2008 鎢精礦化學分析方法 鈣量的測定 EDTA容量法和火焰原子吸收光譜法(中英文版) Methods for chemical analysis of tungsten concentrates - Determination of calcium content - EDTA volumetric method and flame atomic absorption spectrometric method |
|||
SN/T 1309.6-2010 鞋類檢驗規程 第6部分:室內鞋(中英文版) The footwear test procedures - Part 6: indoor shoes |
|||
GB 5138-2006 工業用液氯(中英文版) Liquid chlorine for industrial use |
|||
QC/T 29117.17.2-1993 摩托車發動機用磁電機可靠性評定方法(中英文版) (Reliability Evaluation Method motorcycle engine magnetos) |
|||
SJ 2131-1982 潔淨工作臺通用技術條件(中英文版) General specification for clean work stations |
|||
DL/T 1649-2016 配電網調度控制系統技術規範(中英文版) (Technical specification for distribution network dispatching control system) |
|||
JT/T 512-2004 壓縮天然氣汽車維護、檢測技術規範(中英文版) Specification for the maintenance and inspection of compressed natural gas vehicle |
|||
FZ/T 92075-2008 織機卷取輥用包覆帶(中英文版) Covering of winding rooler for loom |
|||
GB/T 17255.3-2009 假肢與矯形器 假肢部件的分類和描述 第3部分:上肢假肢部件的描述(中英文版) Prosthetics and orthotics - Classification and description of prosthetic components - Part 3: Description of upper-limb prosthetic components |
|||
GB/T 28434-2012 地面數位電視廣播單頻網適配器技術要求和測量方法(中英文版) Technical requirements and measurement methods of digital terrestrial television broadcasting single frequency network adapter |
|||
JJG 422-1986 wd-1型微電位計檢定規程(中英文版) Verification regulation of microppotentiometer type WD-1 |
|||
GB/T 9803-1988 水質 五氯酚的測定 藏紅T分光光度法(中英文版) Water quality--Determination of pentachlorophenol by safranine-T spectrophotometric method |
|||
NB/T 42036-2014 螺杆膨脹機 轉子用金屬材料技術規範(中英文版) Specification for metal of rotor of screw expanding machine |
|||
SJ/T 10141-1991 低溫電子學術語(中英文版) Terms for cryelectronics |
|||
GB/T 33371.1-2016 色漆和清漆用漆基 醇酸樹脂 第1部分:通用試驗方法(中英文版) Binders for paints and varnishes—Alkyd resins—Part 1: General methods of test |
|||
JJF 703-2011 車輛壓力試驗器校準規範(中英文版) Pressure Test Instrument for Railway Vehicles |
|||
HJ 2.4-2009 環境影響評價技術導則 聲環境(中英文版) Technical guidelines for noise impact assessment |
|||
GB/T 3871.18-2006 農業拖拉機 試驗規程 第18部分:拖拉機與機具介面處液壓功率(中英文版) Agricultural tractors - Test procedures - Part 18: Hydraulic power at tractor/implement interface |
|||
GB/T 14264-2009 半導體材料術語(中英文版) Semiconductor materials-terms and definitions |
|||
HG/T 3748-2014 橡膠配合劑 沉澱水合二氧化矽水可溶物含量的測定 冷萃取法(中英文版) Rubber compounding ingredients. Silica, precipitated, hydrated, determination of matter soluble in water. Cold extraction method |
|||
SJ/T 10902-1996 電子玻璃中二氧化矽的分析(中英文版) Determination of silica (SiO2) in electronic glass |
|||
TB/T 10301-1994 鐵路信號電纜地下熱縮套管型接續技術規程(中英文版) Technical code for underground connection of railway signal cables with heat-shrinkable products |
|||
HG/T 2766-1996 工業溴酸鈉(中英文版) (Industrial sodium bromide) |
|||
GB/T 25692-2010 土方機械 自卸車和自行式鏟運機用限速器 性能試驗(中英文版) Earth-moving machinery - Retarders for dumpers and tractor-scrapers - Performance tests |
|||
GB/T 21360-2008 汽車空調用製冷劑壓縮機(中英文版) Refrigerantor compressor for motor vehicle air conditioning |
|||
CJJ/T 114-2007 城市公共交通分類標準(附條文說明)(中英文版) Standard for classification of urban public transportation |
|||
YY 91056-1999 (中英文版) Evaluating requirements for corrosion test of electroplated metallic coatings of medical instruments |
|||
GB 8952-1988 啤酒廠衛生規範(中英文版) Hygienic specifications of beer factory |
|||
GB/T 37891.5-2019 帶平鍵和端鍵傳動的銑刀杆 第5部分:帶法蘭接觸面的多棱錐柄刀杆的尺寸和標記(中英文版) Cutter arbors with parallel key and tenon drive—Part 5:Dimensions and designation of tool holders with polygonal taper interface with flange contact surface |
|||
GB/T 32972-2016 鋼鐵企業軋鋼加熱爐節能設計技術規範(中英文版) Technical specification energy saving design for reheating furnace of steel rolling in iron and steel works |
|||
GB/T 34554-2017 建築玻璃幕牆粘接結構可靠性試驗方法(中英文版) Test method of structural adhesion reliability for building glass curtain wall |
|||
GB/T 35015-2018 氣瓶外測法水壓試驗用標準瓶的標定方法(中英文版) Calibration method for calibrated cylinder used in water jacket hydrostatic test |
|||
GB/T 18275.2-2000 汽車制動傳動裝置修理技術條件 液壓制動(中英文版) Specifications for automobile braking transmission device being overhauled--Hydraulic braking |
|||
GB/T 30968.3-2014 聚合物基複合材料層合板開孔/受載孔性能試驗方法 第3部分:開孔拉伸強度試驗方法(中英文版) Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 3: Test method of open-hole tensile strength strength |
找到:115477條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [1931] [1932] [1933] [1934] [1935] [1936] [1937] |